Suction funnel aluminum (polished) for 40 mm Bing carburetor 100 mm, open, without sieve (copy)

Description

Very nice, polished aluminum intake funnel OPEN, without sieve. Front inner diameter 55 mm (connection dimension on the carburettor). E.g. for BING carburetor 40. Fastened with 3 grub screws (offset by 120 degrees) on the flange of the carburetor of BMW 2-valve motorcycles.
Very noble and high quality part!
When using open intake funnels, the carburetor must be retuned. Experience has shown that the main jet is selected a “tens number” larger (eg for 170 the 180 etc.). The idle jet should be selected to 50 instead of 45. The exact adjustment is made by means of the position of the nozzle needle.
Operation in public traffic not permitted.
Other velocity stacks for Moto Guzzi (30, 36 and 40 Dellorto) available at short notice.
Inside 55 mm, outside 68 mm
Overall length 60 mm (including flange)
Diameter approx. 100mm (outside)
These intake funnels are made individually by hand from the “solid”.
The outside dimensions can vary.